In this simplified guide we will teach you how to configure your smart light switch. The installation is very simple, as you will see, but if you have any fear, you can ask us for an email budget by email (send email to geral@smartify.pt)
For the installments need first turn off the current of electricity from your house to avoid getting a shock. Then you need to know what type of installation you will do:
With neutral cable, the procedure is as follows:
1. Remove the anterior switch and disappear it.
2. Identifies the phase cable, usually red color. Bind it to your new smart light switch to L. position.
3. Put the returns in positions that have screw: L1, L2, L3.
4. Call the current and valid if the switch light lights up.
5. Put the neutral cable in position n
To do the installation without neutral cable:
1. Remove the old switch and take the screws.
2. Identifies the phase cable. Connects it to the new switch to L. position.
3. Put the returns in positions that have screw: L1, L2, L3.
4. Call the current and valid if the smart switch light lights up.
5. Install the condenser at the fate of the switch (eg point of light). Put one of the condenser's ends in the positive and one in the negative.
Now you can use your switch normally, but you still can't enjoy your smart quality. For this, you need to configure you and we teach you how to do it here.
Any more smart home/ house or other devices question? Now contact us now for all Domotic clarifications for here.
Now you are Another step ahead to have a completely personalized smart house to Your taste. Buy yours now Smart light switch!
