Description
WiFi RF (433mhz) Hub/ Bridge Controller - Sonoff RFBridgeR2
The RF BridgeRZ 433 acts as a "bridge" between smart devices/remote controls
that use radio frequency (RF433.92 MH2) and smart devices
equipped with WiFi.
With this RF Bridge, your smart devices, whether RF
or WiFi type, can then be controlled via an App (eWeLink) or
RF remote controls or even by motion sensors, door/window sensors,
etc.
Sonoff Bridge can use up to 16 RF controls (RF remote controls;
RF remote buttons; motion sensors; door/window sensors).
Each remote control is counted as one control device, so
if you use 16 4-button remote controls, you will have 64 control signals at your
disposal.
The RF BridgeR2 copies and simulates the signals from Sonoff RF remote controls (4 or 8 buttons) allowing you to control, via the eWeLink App, any compatible RF smart device (even if the remote control is not available or is lost).
Compatible RF buttons and switches:
4-button RF remote control
8-button RF remote control
SmartWise RF1 / RF2 / RF3 RF wall switches
SmartWise TIR1 / TIR2 / TIR3 RF wall switches
SmartWise RF push button / video doorbell
Compatible Sonoff (RF) sensors:
PIR2: Human motion sensor
DW1: Magnetic door/window sensor
SmartWise DW2: Enhanced magnetic door/window sensor
It can be used to turn on/off most 433.92MHz RF-controlled Sonoff products, such as RF-controlled switch, RF-controlled socket, RF-controlled light bulb, etc.
Allows setting 8 schedule/countdown timers to turn on/off RF-controlled devices.
Compatible with Google Assistant and Amazon Alexa.
Product Specifications:
Power Supply: USB 5V 1A
Plug type: micro-USB
Wireless Standards:
- WiFi 802.11b/g/n;
- RF 433.92MHz
Antenna: AES-128 (included on PCB)
WiFi Range: 60m (without obstacles)
Security: WPA-PSK/WPA2-PSK
MCU: ESP8285
Certifications: CE, FCC, RoHS
Operating Temperature: -10°C ~ 40°C
Material: PC VO
Dimensions: 62 x 62 x 20mm
Notes:
The RF receiver is compatible with fixed RF codes at 433.92 MHz frequency. For example: PT2260, PT2262, PT2264, EV1527, etc.
Does not support learning rolling codes and dynamic codes;
The bridge can control devices via RF433 but cannot obtain their operating status (ON/OFF).
The Sonoff RF Bridge is powered by standard 5V microUSB (adapter and cable not included).
Includes:
1x RF remote control
1x Instruction manual
(Does not include power cable)
Reference: RFBridgeR2