In this simplified guide, we'll teach you how to configure your smart light switch. Installation is very simple, as you will see, but if you have any concerns, you can ask us for an installation quote by email (send an email to geral@smartify.pt)
To install it, you first need to turn off the electricity in your home to avoid getting a shock. Then, you need to know what kind of installation you are going to do:
With neutral cable, the procedure is as follows:
1. Remove the front switch and unscrew it.
2. Identifies the phase cable, normally colored red. Plug it into your new smart light switch in the L position.
3. Place the returns in the positions that have a screw: L1, L2, L3.
4. Turn on the power and confirm that the light on the switch is on.
5. Put the neutral cable in position N
To install without neutral cable:
1. Remove the old switch and remove the screws.
2. Identifies the phase cable. Connect it to the new switch in the L position.
3. Place the returns in the positions that have a screw: L1, L2, L3.
4. Turn on the power and confirm that the smart switch light is on.
5. Install the capacitor at the switch destination (eg light spot). Place one end of the condenser on the positive and the other on the negative.
Now you can use your switch normally, but you still can't take advantage of its smart qualities. For that, you need to configure it and we teach you how to do it here .
Any more questions about smart home / smart home or other devices? Contact us now for all home automation inquiries via here .
Now you're one more step ahead to have a smart home completely customized to your liking . Buy yours now smart light switch!
